Room Alert Products


Request a Quote

Water Tank Level 2 (NO)

RMA-WTL2-SEN

AVTECH’s Water Tank Level 2 Sensor (NO) monitors the rise and fall of water in a container (i.e. typically a large tank). The float and control weight are composed of chemically-resistant polypropylene; the 16' (4.88 m) cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low.

Dimensions of the float switch are 5.1" H x 3.0" W (12.95 cm x 7.62 cm). The control weight is 4" H x 2.25" W (10.16 cm x 5.72 cm). The 16' (4.88 m) attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" (25.4 cm) and a maximum of 50" (1.27 m). Please see the Installation Note for more information.

Product # RMA-WTL2-SEN

Water Tank Level 2 (NO) $ 245.00

Order before 3pm EST for same day shipping!   

Shopping Cart

Your cart is empty.

Loading…

Call Now For Your Free Consultation

888.220.6700
401.628.1600

Ready To Ship!

Click For Stock Updates
AVTECH’s Water Tank Level 2 Sensor (NO) monitors the rise and fall of water in a container (i.e. typically a large tank). The float and control weight are composed of chemically-resistant polypropylene; the 16' (4.88 m) cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low.

Dimensions of the float switch are 5.1" H x 3.0" W (12.95 cm x 7.62 cm). The control weight is 4" H x 2.25" W (10.16 cm x 5.72 cm). The 16' (4.88 m) attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" (25.4 cm) and a maximum of 50" (1.27 m). Please see the Installation Note for more information.

There is also a Normally Closed (NC) version of this sensor called the Water Tank Level 1 Sensor (NC), product # RMA-WTL1-SEN.

QUESTIONS? Call one of our experienced Product Specialists for answers regarding this electrical current sensor. or send us an email at Sales@AVTECH.com.

Protect Your Facility... Don't Wait Until It's Too Late!   Remember, 'Proactive Monitoring' is always better than 'Disaster Recovery'.


Features & Specification For Water Tank Level 2 (NO) Sensor
Water Tank Level 2 (NO) Sensor
Environment Condition Monitored
Water Tank Level
Type Of Sensor
Switch
Power Supply
Monitoring Unit
Attached Tank Sensor Cable Type
Low-voltage 2-wire, PVC coated, IP67 NEMA6
Attached Tank Sensor Cable Length
16' (4.88 m)
Included Sensor Cable Type
Low-voltage 2-wire speaker cable
Included Sensor Cable Length
25' (7.62 m)
Maximum Sensor Cable Length
900' (274.32 m)
Float Switch Dimensions
5.1"H x 3.0"W (12.95 cm x 7.62 cm)
Control Weight Dimensions
4"H x 2.25"W (10.16 cm x 5.72 cm)
Switch State Differential
10" to 50" (25.4 cm to 1.27 m)
Compatible Products
Room Alert 32S, 12S, 3S, 32E/W, 12E, 4E, 3E & 3W
The AVTECH Water Tank Level 2 (NO) Includes:
(1)
Water Tank Level 2 (NO) w/16' (4.88 m) PVC coated cable
(1)
25' speaker wire cable (extendable up to 900' or 274.32 m)
Installation Note & Instruction Sheet
90-Day Warranty & Replacement Guarantee
AVTECH's many years of experience since 1988
Room Alert is Made in the USA, ships worldwide from our locations in the US and EU, and has been protecting facilities since 1988.