|
|
|
|
|
|
|
|
 |
|
Frequently Asked Questions
|
|
|
|
| |
|
|
|
How do I extend my Digital Sensor Cable longer than the supplied 25 feet?
By design, external digital sensor cables are 25 feet in length and can be extended up to a supported100 feet in total length.
To extend the sensor cable, you will need a RJ-11 cable with coupler which is available from AVTECH Software.
To order these cables, contact your Product Specialist or click here to purchase on-line.
To extend an external digital sensor cable:
- Remove the external digital sensor to be extended by unplugging its RJ-11 cable from the front of the unit.
-
Using a 25 foot RJ-11 cable with coupler, insert the RJ-11 connector into the AVTECH unit’s external sensor port.
-
Plug the RJ-11 connector on the sensor cable to the extension cable.
If you wish to extend the sensor up to the supported 100 feet in length, multiple RJ-11 extension cables can be connected using the methods above.
It is important to note that AVTECH does not recommend extending a cable to a greater distance than 100 feet and does not support splicing or cutting into existing wires to shorten or lengthen the provided cable.
|
|
|
|
|
|
|
|
|
|
|
888.220.6700
Sales@AVTECH.com
AVTECH Software, Inc.