Knowledge Base  /  Frequently Asked Questions  /  GoToMyDevices.com

How To Set Up Room Alert 3 Wi-Fi (VIDEO)

You may view a video demonstration of setting up a Room Alert 3 Wi-Fi below:

Setting Up Room Alert 3 Wi-Fi

Step 1: Connect to power.

Plug the Room Alert 3 Wi-Fi into power.

Notice that the “S” LED (on the right) blinks once.

S_LED_Blink_Once_RA3W

Step 2: Configure network settings.

A. Connect to the Room Alert.

– In your Windows task bar, select your Network Connection Status icon to open your list of networks.

Windows_System_Tray_Icons

– Select your Room Alert 3 Wi-Fi’s name (3WXXXXXX), and then select Connect.

– Enter the following network security key, which is case-sensitive: RoomAlert3W.

Windows_Networks_Connect_Button_RA3W

B. Open the web interface.

– Enter 192.168.0.1 in the address bar of your web browser.

– Then enter the Room Alert 3 Wi-Fi’s default username and password to open the device’s web interface:

Username: admin
Password: PASSWORD

Browser_SoftAP_LogIn_RA3W

C. Connect the Room Alert 3 Wi-Fi to your wireless network.

Please note that Room Alert 3 Wi-Fi supports the following wireless security types: WEP (Client Only), WPA Personal and WPA2 Personal.

– Once the web interface opens, navigate to Settings–>QuickConnect.

– In the QuickConnect page, select your Wi-Fi networks’ name from the list.

RA3W_QuickConnect_WLAN_Link_Scan_Example-Wireless-Network

– Enter your Wi-Fi network’s password if required.

– Next select Apply to temporarily save your changes.

– Then select Submit to commit your changes to the device.

RA3W_QuickConnect_Example-Wireless-Network-after-Apply

Your Room Alert 3 Wi-Fi will automatically obtain an IP address on your network.

Notice that the “L” LED (on the left) stays lit solidly when your device is connected to your network.

L_LED_Lit_Solid_RA3W

D. Disconnect from your Room Alert 3 Wi-Fi’s wireless access point.

– Return to your list of wireless networks on your computer.

– Select your Room Alert 3 Wi-Fi.

– Then select Disconnect.

Windows_Networks_Disconnect_Button_RA3W

Step 3: Configure alerts in your GoToMyDevices account.

– Log in to your account at GoToMyDevices.com. Don’t have an account yet? Please see this FAQ for how to create one: How to Register at GoToMyDevices.com (VIDEO).

– Select Devices. Your Room Alert 3 Wi-Fi should automatically appear in your list of devices.

GTMD_Device_List_with_RA3W_Example_Org

If you don’t see your Room Alert 3 Wi-Fi, you may add it using the Register Device button.
See this FAQ for instructions: How to Add Devices to GoToMyDevices.com (VIDEO).

– Then select Alerts–>Create Alerts to begin configuring alerts for your Room Alert 3 Wi-Fi. This FAQ shows you how: How to Create Alerts in GoToMyDevices.com (VIDEO).

You may also configure alerts for your Room Alert 3 Wi-Fi in AVTECH’s Device ManageR software if you prefer. This FAQ shows you how: How To Create Alerts In Device ManageR: Start To Finish (VIDEO).

Device ManageR is available for download from your GoToMyDevices account. Please see this FAQ for how to download from GoToMyDevices.com: How to Download Firmware & Software from GoToMyDevices.com.

Facebooktwittergoogle_plusredditpinterestlinkedinmail