Knowledge Base  /  Product Tours

Room Alert 12E Product Tour

Welcome to the Room Alert 12E

The Room Alert 12E is our mid-range solution for IT and facilities environment monitoring.

It has all the features of our Room Alert 32E on a smaller scale and a lower price.

To Learn More

Click on any feature to see more information about this model.

Room Alert 12E
Power Port Ethernet Port Digital Sensor Ports Reset Button Light Tower & Relay Adapter Port Analog Sensor Input Port Relay Output Port Switch Sensor Ports

Power Port

This port accepts AVTECH's 5V power adapter (shown above) to power the Room Alert 12E by main power. There are models for each and every country.

Room Alert 12E is PoE-enabled, so you may power it over PoE instead if you wish.

Ethernet Port

This RJ-45 port connects your Room Alert 12E to your network via an RJ-45 Ethernet cable (shown above).

This port is PoE-enabled, so you may power your Room Alert 12E by connecting it to your PoE-enabled switch.

Digital Sensor Ports

Reset Button

This button resets Room Alert to defaults. It clears out all of your custom entries, such as your password and static IP address.

Light Tower & Relay Adapter Port

This port accepts a connection to AVTECH's Light Tower & Relay Adapter, through which you can connect a Light Tower (pictured above) or Relay Switch to your Room Alert 12E.

The Light Tower provides visual and audible alerting, while the Relay Switch can turn on and off up to 4 low-voltage electrical devices.

Analog Sensor Input Port

This port accepts an analog sensor, such as AVTECH's Current Loop 1 or 2 (shown above) or an Extreme Temperature Sensor.

Relay Output Port

This set of ports accepts up to 2 low-voltage electrical devices, such as a fan or an air conditioner, so that your Room Alert 12E can turn them on and off in response to alarm conditions.

Switch Sensor Ports

This set of ports accepts up to 4 switch sensors or dry contacts on a device such as a UPS. AVTECH offers switch sensors for every critical environment factor, such as powerflood (shown above), smokeair flow and more.

Room Alert is Made in the USA, ships the same day, and has been protecting facilities in over 185 countries since 1988.

Room Alert Manager - Compatible Devices

The latest version of Room Alert Manager supports only the devices below.

It does not support any legacy Room Alert or TemPageR models.


Note about support for the Room Alert 3W:

1. You must have this model at default credentials for compatibility with Room Alert Manager. Username: admin | Password: PASSWORD.

2. Room Alert Manager does not currently support firmware updates for this model.

Custom credentials and firmware updates for the Room Alert 3W will be included in a future release of Room Alert Manager.


Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 4E
Room Alert 3E
Room Alert 3W at default credentials (Username: admin | Password: PASSWORD)