By design, external digital sensor cables are 25 feet in length and can be extended up to a supported 100 feet in total length.<\/p>\n
To extend the sensor cable, you will need a RJ-11 cable with coupler which is available from AVTECH Software.<\/p>\n
To order these cables, contact your AVTECH Product Specialist.<\/p>\n
1. Remove the external digital sensor to be extended by unplugging its RJ-11 cable from the front of the unit.<\/p>\n
2. Using a 25 foot RJ-11 cable with coupler, insert the RJ-11 connector into the AVTECH unit\u2019s external sensor port.<\/p>\n
3. Plug the RJ-11 connector on the sensor cable to the extension cable.<\/p>\n
If you wish to extend the sensor up to the supported 100 feet in length, multiple RJ-11 extension cables can be connected using the methods above.<\/p>\n
It is important to note that AVTECH does not recommend extending a cable to a greater distance than 100 feet and does not support splicing or cutting into existing wires to shorten or lengthen the provided cable.<\/p>\n","protected":false},"excerpt":{"rendered":"
By design, external digital sensor cables are 25 feet in length and can be extended up to a supported 100 feet in total length. To extend the sensor cable, you will need a RJ-11 cable with coupler which is available from AVTECH Software. To order these cables, contact your AVTECH Product Specialist. To extend an […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"ngg_post_thumbnail":0,"footnotes":""},"categories":[349,2],"tags":[],"class_list":["post-185","post","type-post","status-publish","format-standard","hentry","category-sensors","category-room-alert"],"yoast_head":"\n