Knowledge Base / Frequently Asked Questions / Room Alert

How To Set A Password On Your Room Alert 3 Wi-Fi

You may set a password for your Room Alert 3 Wi-Fi to prevent unauthorized users from accessing the unit’s local web interface.

Setting a Password

1. Open your Room Alert 3 Wi-Fi’s web interface. You may open the interface using Device Discovery, Device ManageR, or your account at RoomAlert.com. You may also type the IP address of the unit directly into the address bar of your web browser.

2. Navigate to Device Settings → User to open the User screen.

You may change the password for the web interface here. (The default password is PASSWORD.)

3. Select admin.

4. Then in Password, enter your new password.

5. Select Submit to save your changes.

6. The next time you log in to your Room Alert 3 Wi-Fi web interface, enter these credentials:

Username: admin
Password: YourNewPassword

You may not change the username for your Room Alert 3 Wi-Fi’s web interface. The username is always “admin.”

Resetting An Unknown Password

If you have lost the password to your Room Alert 3 Wi-Fi, you’ll need to reset the unit to factory defaults to regain access. Resetting to factory defaults erases all existing settings, including the existing password.

Please see our FAQ How To Reset A Room Alert Monitor To Factory Defaults for instructions.