Support

Knowledge Base  /  Frequently Asked Questions  /  RoomAlert.com  /  Room Alert Link

Where To Find Room Alert Link’s Software Version

You may view Room Alert Link’s software version in the following places:

  1. Link’s local web interface
  2. The Programs & Features list within Windows Control Panel

View the software version listed in Link’s interface.

  1. First open Link’s web interface by following the instructions in our FAQ, How To Access Link’s Local Web Interface.
  2. The version is listed in the footer at the bottom of the screen.
  3. The example below shows Link Version 1.6.0.

View the software version listed in Windows Control Panel.

  1. Open the Programs and Features list in the Control Panel of the Windows system that Link is installed on. You may find Programs and Features at the following path: Start–> Control Panel–> Programs–> Programs and Features.
  2. Locate ‘AVTECH Room Alert Link’ in the list of programs.
  3. The version is displayed in both the Name and Version columns, as shown below.


Facebooktwitterredditpinterestlinkedinmail
Room Alert is Made in the USA, ships worldwide from our locations in the US and EU, and has been protecting facilities since 1988.

You may find Windows Command Prompt at the following path:

  • Windows 7 & 8
    Start--> All Programs--> Accessories--> Command Prompt
  • Windows 10
    Start--> All Apps--> Windows System--> Command Prompt

To run Windows Command Prompt as an administrator:

  • Windows 7 & 8
    Right-click on Command Prompt and select Run as administrator.
  • Windows 10
    Right-click on Command Prompt, select More and then select Run as administrator.

Example Polling Method Properties saved in Orion SolarWinds:

If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.

Room Alert Link- Supported Firmware Updates



Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 4E
Room Alert 3E

Room Alert Manager - Compatible Devices

The latest version of Room Alert Manager supports only the devices below.

It does not support any legacy Room Alert or TemPageR models.

Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E
Room Alert 3W