Knowledge Base / Frequently Asked Questions / Room Alert
If you need your Room Alert Monitor’s JSON data, you may find it by typing one of the following URLs into your browser’s address bar:
You’ll see a text file appear in your browser like the one shown below with current JSON data from your Room Alert Monitor:
You may find Windows Command Prompt at the following path:
To run Windows Command Prompt as an administrator:
If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.
Current S models | Current E models |
---|---|
Room Alert 32S | Room Alert 32E |
Room Alert 12S | Room Alert 12E |
Room Alert 4E | |
Room Alert 3E | |
Current S models | Current E models |
---|---|
Room Alert 32S | Room Alert 32E |
Room Alert 12S | Room Alert 12E |
Room Alert 3S | Room Alert 4E |
Room Alert 3E | |
Room Alert 3W |
Current Models | Legacy Models |
---|---|
Room Alert 32E | Room Alert 32W |
Room Alert 12E | Room Alert 26W |
Room Alert 4E | Room Alert 24E |
Room Alert 3E | Room Alert 11E |
Room Alert 7E | |
TemPageR 4E | |
TemPageR 3E |