How To View Multiple Devices Simultaneously In Device ManageR

In Device ManageR, you can view multiple Room Alert devices simultaneously on the same screen. This allows you to easily review current sensor data from multiple devices for monitoring and comparison purposes.

To view multiple devices simultaneously in Device ManageR, follow these steps:

1. Open Device ManageR in your web browser. You may open it by entering ‘localhost:8080’ or ‘<IP address of host system>:8080’ in your browser’s address bar.

2. Your Room Alert devices will automatically populate the Discovered Devices list to the left of the screen.

3. Hold the Control (CTRL) key and select each device that you want to view in the Discovered Devices list.

Note that you can also unselect a device while holding the Control (CTRL) key to remove it from your multiple device view.

4. Below the Discovered Devices list, a blue box labeled Perform On Selected Devices will appear, with a list of available actions. Select any action you want your selected devices to perform.

Viewing Graph Display

By default, your devices will appear in Sensor Display view.

To view graphed sensor data for the selected devices, click on the Graph Display tab in each device’s section. This will show you the graph data for each device separately.

To learn more about the graph display, see this FAQ: How To View A Real-time Graph Of Sensor Values.