Knowledge Base  /  Frequently Asked Questions  /  Axis Cameras

How To Configure An Axis Camera Motion Detection Alert In Room Alert Manager

If you’re using an Axis camera with Room Alert Manager, you may configure alerts to notify you when the camera detects motion.

Before you begin:

First, configure your camera to notify Room Alert Manager when motion is detected. This FAQ shows you how: How To Configure Your Axis Camera To Send Images To Room Alert Manager When Motion Is Detected.

Please follow these instructions to set up an Axis Camera Motion Detection Alert:

  1. Begin configuring your alert in Room Alert Manager. This FAQ shows you how: How To Create Alerts In Room Alert Manager.
  2. In the When… section of your new alert:
    • In Choose Device, select the camera you wish to detect motion from.
    • In Choose Sensor, select Motion.
    • In Choose Channel, select Motion Detection.
    • In Choose Value, select either is Detected or is Not Detected, depending on when you’d like to be notified.
  3. Then add actions to the Then… section of your alert.
  4. When you’re done configuring your alert, select Save Changes.
Facebooktwitterredditpinterestlinkedinmail
Room Alert is Made in the USA, ships the same day, and has been protecting facilities in over 185 countries since 1988.

You may find Windows Command Prompt at the following path:

  • Windows 7 & 8
    Start--> All Programs--> Accessories--> Command Prompt
  • Windows 10
    Start--> All Apps--> Windows System--> Command Prompt

To run Windows Command Prompt as an administrator:

  • Windows 7 & 8
    Right-click on Command Prompt and select Run as administrator.
  • Windows 10
    Right-click on Command Prompt, select More and then select Run as administrator.

Example Polling Method Properties saved in Orion SolarWinds:

If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.

Room Alert Link- Supported Firmware Updates



Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 4E
Room Alert 3E

Room Alert Manager - Compatible Devices

The latest version of Room Alert Manager supports only the devices below.

It does not support any legacy Room Alert or TemPageR models.

Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E
Room Alert 3W