About AVTECH

Room Alert Monitor How-To Guides

Search all Room Alert Monitor How-To Guides…

…or Search all How-To Guides instead.

Browse all Room Alert Monitor How-To Guides:

  • How To Extend Digital Sensor Cables

    By design, external digital sensor cables are 25 feet in length and can be extended up to a supported 100 feet in total length. To extend the sensor cable, you will need a RJ-11 cable with coupler which is available from AVTECH Software. To order these cables, contact your AVTECH Product Specialist. To extend an […]


  • Where To Place Digital Sensors For The Best Readings

    Placing Digital Temperature Sensors in the right locations is essential for reliable monitoring of the environment. Without proper placement, the most relevant temperature data may not be obtained. – It is recommended that the Room Alert Monitor itself is placed near the equipment that you wish to monitor. The standard cable length for Digital Temperature […]


  • How To Enable TFTP In Windows (Versions Vista And Above)

    In certain cases, Technical Support may direct you to upload files to your AVTECH device using TFTP (trivial file transfer protocol). The TFTP client is disabled by default in Windows versions Vista and above; you must enable it before you can successfully use TFTP commands. To enable TFTP on your Windows system, follow these steps: […]


  • How To Connect A Room Alert Monitor Directly To A Computer (Advanced Troubleshooting)

    You may need to connect your Room Alert Monitor directly to your Windows computer for troubleshooting purposes if you are experiencing one of the following issues: You are having difficulty discovering your Room Alert Monitor and other advanced methods have not worked. You are having issues loading the Room Alert Monitor’s Status or Settings pages […]


Room Alert is Made in the USA, ships worldwide from our locations in the US and EU, and has been protecting facilities since 1988.

You may find Windows Command Prompt at the following path:

  • Windows 7 & 8
    Start--> All Programs--> Accessories--> Command Prompt
  • Windows 10
    Start--> All Apps--> Windows System--> Command Prompt

To run Windows Command Prompt as an administrator:

  • Windows 7 & 8
    Right-click on Command Prompt and select Run as administrator.
  • Windows 10
    Right-click on Command Prompt, select More and then select Run as administrator.

Example Polling Method Properties saved in Orion SolarWinds:

If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.

Room Alert Link- Supported Firmware Updates



Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 4E
Room Alert 3E

Room Alert Manager - Compatible Devices

The latest version of Room Alert Manager supports only the devices below.

It does not support any legacy Room Alert or TemPageR models.

Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E
Room Alert 3W