Knowledge Base  /  Frequently Asked Questions  /  Room Alert Manager

How to Access Room Alert Manager’s Web Interface

Default log in credentials for Room Alert Manager:

  • Username: admin
  • Password: password

To open Room Alert Manager’s web interface, follow these steps.

1. Open a compatible web browser. Internet Explorer is not compatible.

2. In the address bar at the top of the browser screen, enter one of the following:

If you are on Room Alert Manager’s host computer, enter this:

  • localhost:9393
localhost:9393

If you are on a different computer on the same network, enter this:

  • IPAddressOfRoomAlertManager’sHostComputer:9393
Example: 192.168.2.100:9393

3. When Room Alert Manager’s login page opens, enter your username and password.

The default Admin user’s credentials are:

  • Username: admin
  • Password: password

4. Select Sign in or press the Enter key on your keyboard to open Room Alert Manager.

To change the default Admin’s credentials, please see How To Configure Users In Room Alert Manager.

Facebooktwitterredditpinterestlinkedinmail
Room Alert is Made in the USA, ships the same day, and has been protecting facilities in over 185 countries since 1988.

Example Polling Method Properties saved in Orion SolarWinds:

If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.

Room Alert Link- Supported Firmware Updates



Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 4E
Room Alert 3E

Room Alert Manager - Compatible Devices

The latest version of Room Alert Manager supports only the devices below.

It does not support any legacy Room Alert or TemPageR models.

Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E
Room Alert 3W