About AVTECH

Room Alert Account How-To Guides

Search all Room Alert Account How-To Guides…

…or Search all How-To Guides instead.

Browse all Room Alert Account How-To Guides:

  • How To Enable/Disable Push To RoomAlert.com

    Starting with the following firmware releases, the AVTECH devices listed below automatically push sensor data to RoomAlert.com. Push to RoomAlert.com is enabled by default. The instructions below show you how to configure push.


  • How To Register For A Room Alert User Profile

    Creating a Room Alert user profile is the first step in gaining access to your organization’s account, where you may view your devices, alerts, historical data, and more (based on your user role). You may create your user profile through RoomAlert.com or through the Room Alert mobile app. For more information, please see the tabs […]


  • How To Set Up Room Alert 3 Wi-Fi (VIDEO)

    You may view a video demonstration of setting up a Room Alert 3 Wi-Fi below: Setting Up Room Alert 3 Wi-Fi Step 1: Connect to power. Plug the Room Alert 3 Wi-Fi into power. Notice that the “S” LED (on the right) blinks once. Step 2: Configure network settings. A. Connect to the Room Alert Monitor. […]


  • How To Create Alerts In Your RoomAlert.com Account (VIDEO)

    At this time, you cannot create alerts in RoomAlert.com for MAX devices. This functionality will be added in after the next MAX firmware release. You can watch a video demonstration below: You may create alerts for your Room Alert Monitor in your Room Alert Account by following the same basic workflow each time: Trigger Alert […]


Room Alert is Made in the USA, ships worldwide from our locations in the US and EU, and has been protecting facilities since 1988.

You may find Windows Command Prompt at the following path:

  • Windows 7 & 8
    Start--> All Programs--> Accessories--> Command Prompt
  • Windows 10
    Start--> All Apps--> Windows System--> Command Prompt

To run Windows Command Prompt as an administrator:

  • Windows 7 & 8
    Right-click on Command Prompt and select Run as administrator.
  • Windows 10
    Right-click on Command Prompt, select More and then select Run as administrator.

Example Polling Method Properties saved in Orion SolarWinds:

If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.

Room Alert Link- Supported Firmware Updates


Current S modelsCurrent E models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E

Compatible 'S', 'E' and 'W' Monitors



S modelsE & W models
Room Alert 32SRoom Alert 32E
Room Alert 12SRoom Alert 12E
Room Alert 3SRoom Alert 4E
Room Alert 3E
Room Alert 3W

Current Compatible Models

Model
Room Alert MAX
Room Alert 32S
Room Alert 12S
Room Alert 3S
Room Alert 32E/W
Room Alert 12E
Room Alert 4E
Room Alert 3E
Room Alert 3 Wi-Fi