See also: User Guide & Reference Manuals.
Search all Room Alert Monitor How-To Guides…
…or Search all How-To Guides instead.
Browse all Room Alert Monitor How-To Guides:
Using an older version of the Room Alert Monitor web interface? Please click here for the appropriate FAQ. In order to send alerts based on the thresholds you configure in the Room Alert Monitor web interface, you must set up SMTP email.
If you can’t allow your Room Alert Monitor to access a time server through the Internet, and you don’t have one available on your network, you may configure a system running Windows (XP and above) or Windows Server (2003 and above) as a time server. The Room Alert Monitor can then use this system to […]
Room Alert Monitors, Room Alert Manager and your account at RoomAlert.com can send text message alerts to mobile devices by email using email-to-SMS addresses. An email-to-SMS address typically consists of a 10-digit mobile phone number and the mobile carrier’s domain name, in the following format: 1234567890@carrierdomainname.com While you’ll already know the phone number to enter, […]
You may view a video demonstration of setting up a Room Alert 3 Wi-Fi below: Setting Up Room Alert 3 Wi-Fi Step 1: Connect to power. Plug the Room Alert 3 Wi-Fi into power. Notice that the “S” LED (on the right) blinks once. Step 2: Configure network settings. A. Connect to the Room Alert Monitor. […]
When the Settings screen flashes or does not load properly, a typical cause would be certain security devices such as Microsoft’s ISA proxy server or antivirus programs on your network. In order for the Settings tab to open, our program runs certain commands and pages in the background which can sometimes conflict with some antivirus […]
The Ethernet port on your Room Alert Monitor has two LEDs. On the left is the ‘link’ LED; on the right is the ‘activity’ LED. When the unit is not connected to power, they are unlit, as shown below: When the unit is connected to power, you can tell the state the Room Alert Monitor […]
By default, your Room Alert 3 Wi-Fi initially obtains an IP address from your wireless network by DHCP. However, you may later set a static IP address on the device if you wish. Please follow these steps to do so: 1. First, complete the steps in the FAQ below in order to connect your Room […]
The Room Alert 3 Wi-Fi has 2 LEDs. On the left is the ‘L’ (link) LED; on the right is the ‘S’ (status) LED. When the unit is not connected to power, they are unlit, as shown below: Once the unit is powered on, you can tell the state the Room Alert 3 Wi-Fi is […]
The list below shows the conditions that correspond to OPEN and CLOSED for each of AVTECH’s switch sensors. Air Flow 1 Sensor (NC) RMA-AF1-SEN CLOSED (Normal) Air is NOT flowing through the sensor. The flap is closed. OPEN (Alarm) Air is flowing through the sensor. The flap is open. Air Flow 2 Sensor (NO) RMA-AF2-SEN […]
We'd love to talk with you about your monitoring needs. Contact one of our Product Specialists for a free consultation.
You may find Windows Command Prompt at the following path:
To run Windows Command Prompt as an administrator:
If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.
| Current S models | Current E models |
|---|---|
| Room Alert 32S | Room Alert 32E |
| Room Alert 12S | Room Alert 12E |
| Room Alert 3S | Room Alert 4E |
| Room Alert 3E | |
| S models | E & W models |
|---|---|
| Room Alert 32S | Room Alert 32E |
| Room Alert 12S | Room Alert 12E |
| Room Alert 3S | Room Alert 4E |
| Room Alert 3E | |
| Room Alert 3W |
| Model |
|---|
| Room Alert MAX |
| Room Alert 32S |
| Room Alert 12S |
| Room Alert 3S |
| Room Alert 32E/W |
| Room Alert 12E |
| Room Alert 4E |
| Room Alert 3E |
| Room Alert 3 Wi-Fi |
