When the Settings screen flashes or does not load properly, a typical cause would be certain security devices such as Microsoft’s ISA proxy server or antivirus programs on your network. In order for the Settings tab to open, our program runs certain commands and pages in the background which can sometimes conflict with some antivirus […]

The Ethernet port on your Room Alert Monitor has two LEDs. On the left is the ‘link’ LED; on the right is the ‘activity’ LED. When the unit is not connected to power, they are unlit, as shown below: When the unit is connected to power, you can tell the state the Room Alert Monitor […]

By default, your Room Alert 3 Wi-Fi initially obtains an IP address from your wireless network by DHCP. However, you may later set a static IP address on the device if you wish. Please follow these steps to do so: 1. First, complete the steps in the FAQ below in order to connect your Room […]

The Room Alert 3 Wi-Fi has 2 LEDs. On the left is the ‘L’ (link) LED; on the right is the ‘S’ (status) LED. When the unit is not connected to power, they are unlit, as shown below: Once the unit is powered on, you can tell the state the Room Alert 3 Wi-Fi is […]

In certain cases, Technical Support may direct you to Telnet into an AVTECH device to modify its settings or view its trace output. The Telnet client is disabled by default in Windows versions Vista and above; you must enable it before you can successfully use Telnet commands. Enabling Telnet To enable the Telnet client on […]

Room Alert Monitors load the sensor data for display on the Status page using a background XML HTTP request for JSON data. If sensor data is not loading in the Status page, first verify that you can access the JSON data in your web browser. For enter http://<IP Address of Device>/getData.json in your web browser address bar. […]

F = Fahrenheit C = Celsius To Convert Celsius To Fahrenheit F = 1.8C + 32 To Convert Fahrenheit To Celsius C = (F – 32) / 1.8