See also: User Guide & Reference Manuals.
Search all Room Alert Monitor How-To Guides…
…or Search all How-To Guides instead.
Browse all Room Alert Monitor How-To Guides:
If you observe sensor spikes or exceptionally high/low ranges of values, the culprit is usually electro-magnetic interference (EMI). What generates EMI? Florescent lights Large motorized machinery High powered cables Any other device that produces an Electro-Magnetic Field In general, increasing the distance of a sensor from the Room Alert Monitor also increases the chances of […]
In certain cases, Technical Support may direct you to Telnet into an AVTECH device to modify its settings or view its trace output. The Telnet client is disabled by default in Windows versions Vista and above; you must enable it before you can successfully use Telnet commands. Enabling Telnet To enable the Telnet client on […]
Room Alert Monitors load the sensor data for display on the Status page using a background XML HTTP request for JSON data. If sensor data is not loading in the Status page, first verify that you can access the JSON data in your web browser. For enter http://<IP Address of Device>/getData.json in your web browser address bar. […]
F = Fahrenheit C = Celsius To Convert Celsius To Fahrenheit F = 1.8C + 32 To Convert Fahrenheit To Celsius C = (F – 32) / 1.8
By design, external digital sensor cables are 25 feet in length and can be extended up to a supported 100 feet in total length. To extend the sensor cable, you will need a RJ-11 cable with coupler which is available from AVTECH Software. To order these cables, contact your AVTECH Product Specialist. To extend an […]
Placing Digital Temperature Sensors in the right locations is essential for reliable monitoring of the environment. Without proper placement, the most relevant temperature data may not be obtained. – It is recommended that the Room Alert Monitor itself is placed near the equipment that you wish to monitor. The standard cable length for Digital Temperature […]
In certain cases, Technical Support may direct you to upload files to your AVTECH device using TFTP (trivial file transfer protocol). The TFTP client is disabled by default in Windows versions Vista and above; you must enable it before you can successfully use TFTP commands. To enable TFTP on your Windows system, follow these steps: […]
You may need to connect your Room Alert Monitor directly to your Windows computer for troubleshooting purposes if you are experiencing one of the following issues: You are having difficulty discovering your Room Alert Monitor and other advanced methods have not worked. You are having issues loading the Room Alert Monitor’s Status or Settings pages […]
We'd love to talk with you about your monitoring needs. Contact one of our Product Specialists for a free consultation.
You may find Windows Command Prompt at the following path:
To run Windows Command Prompt as an administrator:
If you are using this client, you should configure the general SNMPv3 Credentials, but leave the Read / Write SNMPv3 Credentials section blank.
| Current S models | Current E models |
|---|---|
| Room Alert 32S | Room Alert 32E |
| Room Alert 12S | Room Alert 12E |
| Room Alert 3S | Room Alert 4E |
| Room Alert 3E | |
| S models | E & W models |
|---|---|
| Room Alert 32S | Room Alert 32E |
| Room Alert 12S | Room Alert 12E |
| Room Alert 3S | Room Alert 4E |
| Room Alert 3E | |
| Room Alert 3W |
| Model |
|---|
| Room Alert MAX |
| Room Alert 32S |
| Room Alert 12S |
| Room Alert 3S |
| Room Alert 32E/W |
| Room Alert 12E |
| Room Alert 4E |
| Room Alert 3E |
| Room Alert 3 Wi-Fi |
